Concrete Technology

Different Concrete Mixes: A Practical Guide for Australian Sites

/ Ali Eskandari

Concrete can be described by its strength, binder, density, reinforcement or placing behaviour. Those descriptions overlap: a mix can be supplied ready-mixed, contain supplementary cementitious materials and be designed to self-compact. Choosing between them starts with the element’s required performance and the conditions in which it will be built.

Workers collect fresh concrete from a mixer-truck chute into a wheelbarrow beside reinforcement at a construction site.

For Australian site teams, a useful mix selection connects the drawings and specification with the supplier’s proposed mix, placement method and verification plan. A familiar product name or cement–sand–aggregate ratio does not establish that connection.

Start with the supply class and the required performance

CCAA’s specifying and ordering guide explains the distinction between normal-class concrete, identified by an N designation, and special-class concrete, which accommodates requirements beyond the normal-class framework. N32, for example, denotes a characteristic compressive strength of 32 MPa at 28 days. It is not a complete description of durability, appearance or placing behaviour, and it does not mean every individual test result is judged against a simple 32 MPa pass/fail rule.

Special-class requirements need to be stated explicitly. These might include early-age strength, restricted drying shrinkage, a nominated binder combination or particular fresh-concrete properties. Confirm the acceptance criteria and evidence needed for the actual element; a supplier’s mix code alone does not explain them.

Standards check: AS 1379:2026, Specification and supply of concrete, superseded the 2007 edition. Establish the edition adopted by the project documents before applying detailed conformity rules. The CCAA 2020 guidance cited here provides technical background and predates that revision.

Common concrete types and what to check

The descriptions below identify useful characteristics, rather than mutually exclusive products. None removes the need to meet the project’s structural and durability requirements.

Concrete descriptionWhere it may helpSelection checks
Conventional vibrated concreteRoutine slabs, walls and footings where suitable placement and compaction access are available.Match workability and aggregate size to reinforcement, pumping and the planned compaction method.
Self-compacting concrete (SCC)Congested reinforcement, complex forms or elements where conventional compaction is difficult.Specify filling and passing ability, stability and appropriate fresh-concrete tests. Coordinate formwork and placement arrangements.
Fibre-reinforced concreteApplications requiring specified crack-control or post-cracking performance, depending on the fibre system.Verify fibre type, dosage and required performance. Microfibres, macro synthetic fibres and steel fibres serve different functions.
High-strength concreteMembers whose engineering design requires higher compressive strength.Check the specified strength age and mix evidence alongside placing, curing and early construction requirements.
High-performance concreteElements with particular durability, serviceability or other performance targets.Define the actual targets and test methods. The label is broader than high compressive strength.
Lightweight concreteApplications where reduced density is part of the design or functional brief.Distinguish structural lightweight concrete from insulating or non-structural fills. Verify the specified density and strength.
Air-entrained concreteExposure conditions requiring a controlled air-void system, including relevant freeze–thaw applications.Confirm specified air content, testing and compatibility with the strength and finishing requirements.
Lower-carbon binder blendsProjects seeking lower embodied carbon while maintaining the required performance.Compare product-specific carbon evidence and verify strength development, workability, durability and supply.

Three distinctions that prevent poor substitutions

Ready-mixed describes supply. It does not identify one strength or binder type. The order still needs to describe the required concrete and its intended use. Similarly, a pumpable mix needs to suit the pump arrangement and element; describing it as ready-mixed does not settle that question.

More flow does not automatically mean SCC. CCAA’s super-workable concrete guidance discusses filling ability, passing ability and resistance to segregation. A conventional slump result cannot establish all three. The supplier’s trial evidence and the project’s selected test methods need to address the behaviour required during placement.

Fibres are not interchangeable reinforcement. CCAA’s fibre guidance distinguishes fibre materials and geometries. A mix containing fibres should not be assumed to replace the specified bars or mesh. Any substitution needs the designer’s documented assessment of the required structural and crack-control performance.

Lower carbon needs a like-for-like comparison

Fly ash, ground granulated blast-furnace slag and other supplementary cementitious materials can change setting, strength development and durability behaviour. Their effects depend on the actual materials, blend and curing conditions. A replacement percentage by itself does not establish how an element will perform or when it can be loaded.

Austroads’ 2026 low-carbon concrete guidance supports assessing carbon alongside performance. Request the proposed product’s environmental product declaration where available and compare equivalent functional requirements and life-cycle boundaries. Include early-age requirements and the construction programme in the decision.

Include the architectural finish in the mix brief

For exposed concrete, discuss the required colour, texture, aggregate exposure, joints and repair expectations with the architect, engineer, supplier and placing contractor before fixing the mix. The visible result also depends on formwork, release agents, placement and curing. An agreed trial panel can bring those decisions together before the main work.

Record which materials and methods produced the accepted panel. A later change in binder, aggregate or finishing method should trigger a review of its effect on the agreed appearance as well as the engineering requirements.

A site example: two mixes with the same strength

Consider a hypothetical reinforced wall with congested reinforcement and an exposed finish. Two supplier proposals both meet the nominated compressive-strength requirement. One requires conventional vibration; the other is proposed as SCC. Strength alone cannot decide between them.

Review reinforcement gaps, delivery duration, access for compaction and the finish brief. If SCC is proposed, establish the relevant flow, passing-ability and stability criteria and trial evidence. Coordinate the placing sequence with the formwork designer. If the conventional mix remains suitable, make the compaction access and method achievable. The choice should follow the construction plan and evidence for the element.

Carry the selection through to site

  • Before ordering: confirm the approved mix revision, strength age, exposure-related requirements, workability, aggregate size and any special properties.
  • Before placement: connect the delivery docket and supplier’s mix code with the approved proposal and intended pour location.
  • During acceptance: use the specified fresh-concrete tests and sampling plan. Keep any permitted water or admixture adjustments within the supplier’s controls and project requirements, with records.
  • After placement: apply the agreed compaction, finishing, curing and protection arrangements. Keep test results traceable to the concrete placed.

Mix selection is successful when the supplied concrete meets the element’s performance needs and can be delivered, placed and finished using the agreed methods. Keep that full brief visible when comparing products or considering a substitution.

Sources and photograph

Technical sources checked 15 November 2026. This is a practical selection guide; use the project-adopted standards, specifications and approved mix documentation for detailed requirements.

Featured photograph: fresh concrete sampling at Camp Blaz, Guam, 5 November 2025. Photo: Rachel Landers / OICC Marine Corps Marianas (DVIDS, public domain). International illustrative example.

Join the discussion

No sign-in required. Your email address will not be published. Comments may be held for moderation.