Book Reviews

The New Carbon Architecture: Can Buildings Become Part of the Climate Solution?

/ Ali Eskandari

The environmental performance of a building is often judged by what happens after handover: heating, cooling, lighting and operational energy. Bruce King’s The New Carbon Architecture: Building to Cool the Climate asks a more uncomfortable question. What if a significant part of a building’s climate impact is already committed before anyone moves in? For architects, engineers and contractors, that shifts attention to material choices, existing structures and the decisions made long before procurement.

Front cover of The New Carbon Architecture: Building to Cool the Climate by Bruce King, 2017 paperback edition

Published by New Society Publishers in 2017, this edited, multi-contributor volume is a persuasive introduction to embodied carbon and lower-carbon construction. King, a structural engineer, draws on specialists in carbon accounting, timber, natural fibres, concrete, plastics and building health. The publisher makes its introduction and table of contents available, and an authorised preview of the opening chapter can be examined. This review evaluates that accessible material and the book’s documented scope, not unseen chapters as though they had been read in full.

What the book actually covers

The opening argument distinguishes operational emissions from those associated with producing and assembling buildings. Erin McDade’s first chapter considers the timing of carbon emissions: a tonne emitted during construction affects the atmosphere immediately, while potential operational savings arrive over years. The following chapter, by Catherine De Wolf, Barbara Rodriguez Droguett and Kathrina Simonen, addresses how building carbon is counted. Together they establish why a design team needs a consistent accounting boundary before claiming a material substitution is better.

The published contents then move from measurement to options. Larry Strain’s chapter considers rebuilding and reuse; subsequent chapters address mass timber, straw and other fibres, alternative approaches to concrete, plastics, healthy materials, building height and localisation. An action-plan chapter closes the book. This structure is a strength: it places the decision not to demolish alongside the excitement of inventing new products.

Architectural value: design intent meets material reality

King’s introduction imagines a building whose structure, envelope and interior finishes are visibly made from materials that store atmospheric carbon. It is deliberately aspirational, but the architectural implication is concrete. Material expression is not merely a façade treatment. Exposed timber changes fire protection, acoustic separation, moisture detailing, connections and maintenance expectations. Straw-based insulation changes wall build-ups and weatherproofing strategies. These issues require architects and engineers to resolve details together rather than exchange drawings at the end of design.

For adaptive reuse, the most important architectural decision may be what to retain. A building’s existing frame can represent considerable emissions already spent. Reusing it may avoid replacement materials, although structural capacity, hazardous materials, access, seismic or wind performance and functional suitability still need assessment. The book’s chapter ordering makes that trade-off visible.

What works — and what needs caution

The book’s greatest strength is its breadth across disciplines. A site engineer accustomed to concrete quantities can see why an architect’s material schedule, a structural engineer’s framing grid and a procurement manager’s supplier choices belong in the same carbon conversation. The author’s engineering background also gives the topic credibility beyond a purely aesthetic manifesto.

Its limitation is partly its age. Published in 2017, the book predates substantial developments in environmental product declarations, low-carbon concrete specifications, mass-timber practice and whole-life carbon guidance. Readers should not treat its historical emissions estimates or technology expectations as current Australian benchmarks. Nor should the phrase ‘carbon-storing’ be taken to mean that every timber or bio-based product is automatically climate-positive: sourcing, land use, processing, transport, durability and end-of-life assumptions all matter.

This is also not a construction specification or a substitute for Australian structural, fire, waterproofing and energy-efficiency requirements. Some technologies described are exploratory or context-dependent. Project teams still need tested systems, competent design, local approvals and evidence appropriate to the intended application.

A practical exercise for Australian project teams

Take one upcoming building element — for example, a suspended slab, façade bay or internal partition — and compare a compliant baseline against one plausible alternative. Start with the same functional performance and design life. Record quantities from drawings, request product-specific environmental declarations where available, and identify the life-cycle stages included in each comparison. Ask whether the alternative changes transport, temporary works, installation time, fire detailing, inspection requirements or future replacement cycles.

Then bring the architect, structural engineer, estimator, procurement lead and site representative into a short review. A lower declared product carbon value is not enough if the assembly requires more material or creates unmanageable construction risk. Conversely, a small design change that eliminates an unnecessary element may be more valuable than switching its material. This is a proposed application of the book’s principles, not a case study reported by the authors.

Who should read it — and the verdict

The New Carbon Architecture is especially relevant to architects, structural and civil engineers, sustainability consultants, design managers and construction professionals who want to understand why embodied carbon is a design-and-delivery issue. Specialists seeking current Australian calculation methods will need newer technical guidance alongside it.

The recommendation is to read it for its questions and interdisciplinary perspective, not as a final answer on which material wins. Its enduring contribution is to make the existing building, the structural system and the supply chain part of one architectural discussion. That is a valuable shift for teams trying to build responsibly without losing sight of constructability.

Bibliographic details and sources

Bruce King (with contributing authors). The New Carbon Architecture: Building to Cool the Climate. New Society Publishers, first paperback edition, 5 December 2017. ISBN-13: 9780865718685. Publisher catalogue: 176 pages (bibliographic records distinguish 159 numbered text pages and preliminary/illustration pages). Official publisher listing · Publisher-provided introduction · Publisher-provided contents · Canadian Centre for Architecture library record · Australian retailer listing for the matching paperback ISBN. No verified Amazon product page for this exact edition was found; no Amazon link is asserted.

Featured image: the genuine 2017 paperback front cover of The New Carbon Architecture, © New Society Publishers. Cover source: Summer Beam Books. Reproduced for identification and critical review. The evaluation is based on the publisher’s authorised excerpts, table of contents and independently checked bibliographic information.

Join the discussion

No sign-in required. Your email address will not be published. Comments may be held for moderation.